Infinity Firearms
 
 
 
Change Category:

Various Small Parts

Miscellaneous small parts

Triglide Sear Spring for Para
Titanium Triglide sear spring for Para
 
Select Product:
Quantity:
$26.61 

Thumb Safeties with Optifit® Technology
(Patent Pending)

Confidence at your fingertips. Another Infinity first, these thumb safeties have been designed and fully precision machined from billet to provide you many times the strength and durability found in other safeties on the market. Available in 416 stainless steel or 4140 blued steel and manufactured to the tightest tolerances, these safeties are offered in multiple sizes and paddle widths in keeping with Infinity's commitment to providing you a full selection of premium quality handgun components.

Visit our website, www.sviguns.com or contact your nearest Infinity Firearms® distributor and experience the confidence and peace of mind inherent in the knowledge that you're entering your next competition with the finest components at your fingertips.

 
Select Product:
Quantity:
$60.45 

Tri-Loc II® Barrel Bushing

Infinity Firearms introduces a new twist in locking systems – the Tri-Loc II® System (patent pending). As the name implies, the Tri-Loc II® System has OD and ID 3-lobe geometry that provide multiple wide and long bearing lockup surfaces for bushing to slide and barrel to bushing fit.

When combined with the Infinity Interchangeable Breechface® (IBF) slide, the external lobes of the Tri-Loc II® bushing "drop" with ease into the premachined slide ID relief cuts (available for .700" and .703" diameter bores) and with a slight twist to the final position, provide a zero tolerance interference fit of the bushing to the slide. An operation so smooth that a plastic bushing wrench provides all the torque needed.

The Tri-Loc II® bushing ID geometry is similarly unique. With a three-lobe geometry, the 4 and 8 o’clock lobes provide a low drag-bearing surface for the support of the barrel during slide cycling. No longer are .581" diameter barrels required to be "stepped" for unlocking clearance because the nominal ID of the Tri-Loc II® bushing is .585". Lockup occurs on the 4 and 8 o'clock lobes in the muzzle end of the bushing and at the 12 o'clock lobe in the aft end of the bushing. Fore and aft "lead-in" angles at the 4 and 8 o’clock and 12 o'clock lobes ensure ultra-smooth operation during cycling. These same unique angles create a final lockup surface with an incredibly large and widely spaced bearing area (fore and aft). No longer will your barrel have unsightly circular grooved cuts common with a tight conventional barrel bushing. The Tri-Loc II® is now the bushing of choice for knowledgeable gunsmiths and pistol owners around the world.

 
Select Type:
Quantity:
$36.25 

Front Sight

Infinity offers several sight configurations ranging from the standard .250 tall and .125 wide down to .110, .100, .090 or .080 wide. The sights are available with serrations or smooth finish. Infinity also offers a gold dot .05 wide. Hitting the target is the goal and having the right sight to do the job is critical. To achieve this, Infinity EDMs all of our sights from bar stock material and takes every step to ensure we produce the highest quality, most accurate sight possible.

Also available:

  • Infinity 'Night Sights' - Tritium
  • Infinity 'Bright Sights®' - available in green and red
Remember there is a wide selection of sights available for front and rear mounts, as well as different slide and ribbed barrel configurations.
 
Select Product:
Quantity:
$24.16 

Slide Lock Pin

Made from 416 stainless steel with a hardness of Rc42 or 4140 with a Rc44, each slide lock pin is precision manufactured from bar stock, milled to specific dimensions, then the pin diameter is micro polished for an ultra fine finish out.
 
Select Material:
Quantity:
$60.45 

Magazine Release
All Infinity magazine releases are billet machined from 416 Stainless or 4140 Chrome Moly steel and heat treated to Rc42. All Infinty componenets are machined to exact tolerances for a better first-time fit and the inherent strength and hardness to last the life of the pistol.
 
Select Product:
Quantity:
$42.28 

Competition Frame Magazine Well
Ergonomic design, machine fit and easy installation describe the Infinity line of magwells. Infinity has designed a magwell that works with the user rather than make the user work with the magwell. Our wrists bend only so far, so why not make a magwell that reduces the need to arch the wrist when making that all-important reload.

Infinity created this ergonomic design and has found it to be the most performance-oriented magwell on the market. Fit is crucial to a magwell operating properly. If it doesn't fit the user and the pistol, it is simply a waste of money and time.

Making that one second reload can often mean the difference between first place and losing. Infinity uses a dimensioning process that creates a precise CNC machine fit between frame and magwell. Infinity magwells can be installed without additional fitting required. It is as simple as pushing the magwell onto the frame and driving in the mainspring-housing pin.

Infinity magwells come in three metals: 6061 T-6 aircraft aluminum (red, blue, black and silver), 416 stainless steel and 1018 blued steel. All of the metals used are the finest quality and are CNC machined to exacting dimensions and tolerances.

 
Select Product:
Quantity:
$60.45 

Infinity Slide Racker
Infinity Slide Racker comes checkered and lightened for optimum performance.
 
Select Options:
Quantity:
$58.28 

Thread on compensator
Proven as some of the best in IPSC open competition, the 416 stainless steel or 4140 alloy compensators manufactured by Infinity are available with six or seven ports. These are precision machined from bar stock and threaded to .6875 - 40 tpi. This design allows maximum thread strength and overall efficiency of the compensation system. Available in these different port designs: 10 degree reverse angle ports, vertical ports or 10 degree forward angled ports.
 
Select Product:
Quantity:
$181.44 

Yanek Compensator
The perfect 160 - 165 Power Factor Compensator available in 4140, 416 or titanium.
 
Select Product:
Quantity:
$181.44 

Traditional Frame Magazine Well
Magazine Well for Single Stack which includes corresponding Mainspring Housing
 
Select Product:
Quantity:
$149.99 

Magazine Release Extension Button
Magazine Release Extension Button fits 4-40 thread. We also offer a thinner button in our Large Buttons under Slim type.
 
Select Size:
Quantity:
$10.92 

Competition Frame Mainspring Housing
Mainspring housing fits competition wide body grip. 20 LPI
 
Select Product:
Quantity:
$59.29 

Traditional 1911 Mainspring Housing
1911 Mainspring Housing - Billet machined aluminum, steel, stainless and titanium with 20 LPI crisp checkering
 
Select Product:
Quantity:
$59.29 

With the exception of clothing, on-line sales are available to US Addresses Only. Please email info@sviguns.com for a price quote with shipping.